intermediate
General
CravenSpeed Short Shifter Kit
60 minutes
6 tools
8 steps
Installation Steps
1
Remove OE
Unscrew the shift knob and remove center console panels.
2
Disconnect wiring
Disconnect wiring connectors and remove shift boot frames.
3
Remove lockout plate
Unbolt and remove the reverse lockout plate and shifter frame.
4
Snap ring
Release the snap ring to detach the OE shifter.
5
Pivot bushing
Transfer the pivot bushing to the new shifter.
6
install new unit
Install CravenSpeed unit and secure the linkage with new hardware.
7
reinstall
Reinstall reverse lockout components, boots, and shift knob.
8
Test all gears
Test shifting through all gears before driving.
Rate This Guide
0.0 (0 ratings)
Sign in to rate this guide
Comments
Comments (0)
Sign in to leave a comment
Loading comments...
Tools Required
- Phillips screwdriver
- Trim-removal tools
- 10mm socket
- Snap-ring pliers
- Small pick or flathead screwdriver
- Torque wrench (for re-torquing bolts)
Need Installation Help?
Loading nearby installers...